Ultimate-technology 500 POS Manuel d'utilisateur télécharger pdf (Page 34)

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s) Operation Normal Indication Remarks

25 or 35

Comm (RS232)

Main Port 0 (25)

AUX Port 1 (35)

Prefix

1. While in programming mode, at the Series 500 Keyboard numeric keypad,

enter applicable Function Code 25 (Port 0) or 35 (Port 1).

LED (2) flashes.

2. At the auxiliary keyboard, press the desired key or type the desired key

sequence. Note that the maximum number of key codes is limited to 24 - this

is equivalent to approximately 12 key strokes.

If the Series 500 Keyboard beeps

and LED (2) turns off while

entering key codes at the auxiliary

keyboard, you have exceeded 24

key codes. Repeat steps 1 and 2.

3. At the Series 500 Keyboard, press ENTER.

LED (2) turns off.

4. Program the next function code or exit programming mode by entering 99 on

Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If

using the optional 3-position keyswitch, move switch out of the AUX position.

26 or 36

Comm (RS232)

Main Port 0 (26)

AUX Port 1 (36)

Suffix

1. While in programming mode, at the Series 500 Keyboard numeric keypad,

enter applicable Function Code 26 (Port 0) or 36 (Port 1).

LED (2) flashes.

2. At the auxiliary keyboard, press the desired key or type the desired key

sequence. Note that the maximum number of key codes is limited to 24 - this

is equivalent to approximately 12 key strokes.

If the Series 500 Keyboard beeps

and LED (2) turns off while

entering key codes at the auxiliary

keyboard, you have exceeded 24

key codes. Repeat steps 1 and 2.

3. At the Series 500 Keyboard, press ENTER.

LED (2) turns off.

Program the next function code or exit programming mode by entering 99 on

Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If

using the optional 3-position keyswitch, move switch out of the AUX position.

38 1. While in programming mode, at the Series 500 Keyboard

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Ultimate-technology 500 POS Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Ultimate-technology 500 POS